Need Help! '91 Hurco BMC 20 Axis S Encoder Fault

Results 1 to 4 of 4

Thread: '91 Hurco BMC 20 Axis S Encoder Fault

  1. #1
    Member WoodallMFG's Avatar
    Join Date
    Dec 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default '91 Hurco BMC 20 Axis S Encoder Fault

    Hello all,
    I have a '91 Hurco BMC 20 that decided to throw an "Axis S Encoder Fault" alarm on Monday. The machine will go through the power up/calibration process, but when I select "Warm Machine" it faults the spindle. Tuesday I came in and the machine went through the warm up process, spindle and all, but when I went to run a program the flood would not turn on. Turned off/on the machine and the "Axis S encoder Fault" came back up. Thanks in advance for any help. Dan

    Similar Threads:


  2. #2
    Member cnc-exit's Avatar
    Join Date
    Apr 2019
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: '91 Hurco BMC 20 Axis S Encoder Fault

    Try to check i/o bords in pc it can behardware

    Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt



  3. #3
    Member WoodallMFG's Avatar
    Join Date
    Dec 2019
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: '91 Hurco BMC 20 Axis S Encoder Fault

    Would I be looking for a loose connection?



  4. #4
    Member cnc-exit's Avatar
    Join Date
    Apr 2019
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Re: '91 Hurco BMC 20 Axis S Encoder Fault

    Yes correct
    Or need to check for broken wires

    Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

'91 Hurco BMC 20 Axis S Encoder Fault

'91 Hurco BMC 20 Axis S Encoder Fault

'91 Hurco BMC 20 Axis S Encoder Fault