- Need Help!- '91 Hurco BMC 20 Axis S Encoder Fault
-
Member
'91 Hurco BMC 20 Axis S Encoder Fault
Hello all,
I have a '91 Hurco BMC 20 that decided to throw an "Axis S Encoder Fault" alarm on Monday. The machine will go through the power up/calibration process, but when I select "Warm Machine" it faults the spindle. Tuesday I came in and the machine went through the warm up process, spindle and all, but when I went to run a program the flood would not turn on. Turned off/on the machine and the "Axis S encoder Fault" came back up. Thanks in advance for any help. Dan
Similar Threads:
-
-
Member
Re: '91 Hurco BMC 20 Axis S Encoder Fault
Try to check i/o bords in pc it can behardware
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
-
Member
Re: '91 Hurco BMC 20 Axis S Encoder Fault
Would I be looking for a loose connection?
-
Member
Re: '91 Hurco BMC 20 Axis S Encoder Fault
Yes correct
Or need to check for broken wires
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
- Need Help!- '91 Hurco BMC 20 Axis S Encoder Fault
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules