does anyone have any experience with the hurco bmc 40/m. im currently in the process of starting my own machining company. i have my eye on a bmc40/m its an older machine than what im used to its a 1994. where i currently work the machines are all new ish in the last 8 years. i used to operate a bmc50 i think it was which was always a good reliable machine. I have honed in on this machine as im used to the controller and i have post processors of the ulitmax side of things. the machine has done 29000 hours but appears to be in good condition. im just wiaint to hear back as to when i can go and have a nosey at it. is there anything obvious i should be looking out for
thanks in advance

Similar Threads: