- Need Help!- Hurco VMX 40 axis problem
-
Member
Hurco VMX 40 axis problem
Hi!
What's the mistake?
Similar Threads:
-
-
Member
Re: Hurco VMX 40 axis problem
Have a look at the Y axis Servopack to see if the display is jumping around.
-
Member
Re: Hurco VMX 40 axis problem
1. First i take off belt to see that it runs without belt, but make marking.
2. If servo runs without then problem in mechanics if not then problem in servo side.
3. Servo side need to take of and check for problems.
4. SERVO if ok for mechaniks it posible the wire is broken and you can ckeck with tester for wire problem.
P.s i have wire broke problem
Išsi?sta naudojantis SM-G960F Tapatalk 4 Lt
- Need Help!- Hurco VMX 40 axis problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules