Need Help! Hurco Hawk 2u Hard drive bad with ultipath Software

Results 1 to 3 of 3

Thread: Hurco Hawk 2u Hard drive bad with ultipath Software

  1. #1
    *Registered User* Kcarpenter1986's Avatar
    Join Date
    Nov 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Hurco Hawk 2u Hard drive bad with ultipath Software

    Hello,

    Can any one help me. I have this small Hurco Hawk 2u

    The control is ultipath

    now the hard drive was bad in this when i got it and i have been using it as a manual mill for 6months or so but i want to get the cnc up and running now


    The hard dive will not boot I have had the hard dive recovered and got as much data of it as i can. I have got a new hard drive in to it and loaded windows 98 (i belive the original was Windows 95 but i didnt have this) and it boots up windows. I have then copied all the dater from the old hard drive over and i can open the sortware but seams that only some bits of it work so i think to much is missing.

    I have spoken with hurco and they seam to know nothing about this type of controller now. however they have send me 2 floppy disk (ultipath masters)

    Disk one has Continue Execprog.001 and hurco.LDR on it

    Disk 2 has execprog.002 and led_ed.LAN on it
    I have tryed to boot these disks on Windows 98 and nothing happens


    it seams that this controller from what I have been reading is verfy simuler to BMC30 but with a windows .... Is this correct? and if so do I load the software in the same kind of way?
    I have found this https://docs.google.com/document/d/1...Byszi9LLU/edit
    That says how to load a BMC30 and the files and names seam to very very simuler....

    but if i need two partitions one C:/EXECUTIVE_1 and one D: /PART_PROGS where has windows got to be installed?

    I do now have a copy of windows 95 that i can try but any help would be greatly appreciated from any one that knows any thing or that has one of these that might be able to help with DATA

    I would like to try every thing i can on this controller before considering a retro fit

    Thank you in advance

    Similar Threads:


  2. #2
    *Registered User* Kcarpenter1986's Avatar
    Join Date
    Nov 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Hurco Hawk 2u Hard drive bad with ultipath Software

    any help any one?



  3. #3
    Registered
    Join Date
    Jun 2008
    Location
    England
    Posts
    998
    Downloads
    0
    Uploads
    0

    Default Re: Hurco Hawk 2u Hard drive bad with ultipath Software

    It’s been a long while since I worked on an Ultipath control. By the sounds of it, you may have the wrong disks for it. Where are you in the world?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hurco Hawk 2u Hard drive bad with ultipath Software

Hurco Hawk 2u Hard drive bad with ultipath Software