- Need Help!- Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
-
Registered
Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
I am the new owner of a hurco km3p knee mill. When I go to calibrate the axis the power button will not stay illuminated.
Normal sequence is:
1. Turn on main power
2. wait for computer to boot
3. select manual mode
4. press power button (illuminates when depressed and I can hear a click in the cabinet)
5. power button stays illumicated on release
6. start
7.calibrate axis
8. start
whats happening now is at step 5. the power button will not stay illuminated although I do still hear a click of the relay in the cabinet. Does anyone have any insight?
It was working find this morning.
Similar Threads:
-
-
Registered
Re: Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
SOLVED
The phase generator was not running when I attempted to run a program (OOPS). Not having the 3 phase coming in popped the overloads in the mains power cabinet and just needed to be reset.
- Need Help!- Hurco KM3P Power Button Not Staying Illumicated Servos not coming on
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules