Reply with QuoteAs far as I remember, you can't have probing on a Hawk5. Seems it may have the software option mistakenly installed on it.
Hawk 5 m probe?
My Hawk 5m has the probe option installed, but I did not recieve it with a probe. Does anyone know what probes are compatable and what port on the machine id be conecting too? I do know it is looking for a pulse signal if I program in a probe move. I cannot tell if it is a pre setter its looking for or part contact.
Similar Threads:
- Tormach digitizing probe to find center of a small circle, but bigger than probe tip
- NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
- CMM Liquidation: Renishaw TesaStar Probe Head, Touch Probe, Motorized Indexable
- Need Help!- can you use a probe and mach3 to auto probe a part?
- TP-100 Probe - Compare Performance Motion probe to IMService probe
Re: Hawk 5 m probe?
As far as I remember, you can't have probing on a Hawk5. Seems it may have the software option mistakenly installed on it.
I was a bit shocked to see it as well, but it had a pentium 4 processor and v 2.21 software updated in 2002 with your famous eurohead so I wasnt going to rule it out.Originally Posted by bloke
