Need Help! VMX64 Servo Error & ATC Magazine Error

Results 1 to 8 of 8

Thread: VMX64 Servo Error & ATC Magazine Error

  1. #1
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default VMX64 Servo Error & ATC Magazine Error

    Hopefully someone can help. The machine went down yesterday with this error. Usually I shut the machine down and turn it back on and it clears out. This time the errors stay on. I can't turn the control on. I can't do anything in the ATC Diagnostics because the power won't turn on.

    https://image.ibb.co/bK23zR/IMG_0060.jpg

    I don't have permission to upload photos but that is the controller Errors when I turn the machine on. Any help would be great. Thanks, Chris

    Similar Threads:


  2. #2
    Member
    Join Date
    Jun 2008
    Location
    England
    Posts
    1103
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Check that you have 24v DC at the power supply. Open the back cabinet and look for the servo drives (little beige boxes with a red LED display and four buttons). What do the displays have on them?



  3. #3
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Thanks for the response. The displays have 2 red hash marks on the left and say "66" on the right side.



  4. #4
    Member
    Join Date
    Jun 2008
    Location
    England
    Posts
    1103
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Ok. 24v is still there.
    If the machine has a pneumatic toolchanger, the top error may just be because the arm has dropped after the servo power was lost. The spindle drive error needs to be found now. If you look in the cabinet for the two bigger beige units, what are the numbers in the two displays on them? The converter is on the left and the inverter on the right.



  5. #5
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    The Converter has -U and the Inverter says F2


    Sent from my iPhone using Tapatalk



  6. #6
    Member
    Join Date
    Jun 2008
    Location
    England
    Posts
    1103
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Your inverter has an EEPROM error 2. It looks like you will need to call Yaskawa and have them service the main control board.



  7. #7
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Thanks for all your help.


    Sent from my iPhone using Tapatalk



  8. #8
    Registered
    Join Date
    May 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: VMX64 Servo Error & ATC Magazine Error

    Did you get your problem solved ? I had a similar problem with my 2013 VM30i it took awhile to find the problem but we finally got it figured out.

    its ran flawlessly for 3 years now.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VMX64 Servo Error & ATC Magazine Error

VMX64 Servo Error & ATC Magazine Error