Problem BMC50 MAX32 Won't Jog after HD Replacement

Results 1 to 2 of 2

Thread: BMC50 MAX32 Won't Jog after HD Replacement

  1. #1
    Registered
    Join Date
    Oct 2014
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question BMC50 MAX32 Won't Jog after HD Replacement

    I have a BMC50 running MAX32 version 1.61 which I think is an upgrade from another unknown version. After replacing the hard drive, we are unable to jog the machine with the jog wheel. The + and - keys jog fine, but the handwheel does not. In the diagnostics screen, it shows a value of 255 for Incremental which we assume is the jog wheel encoder input. The encoder tests good, has 5vdc supply and the A and B channels respond. We also replaced it with a known good encoder. There was not a good configuration backup to restore to this machine, but we've got everything working except this one item. Our hunch is it is a configuration issue since the only thing that changed was the HD.

    Does anyone have an idea? Thanks in advance

    Similar Threads:


  2. #2
    Registered bugsquawsher's Avatar
    Join Date
    Apr 2015
    Location
    10000 Burnet Rd
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Did you ever get this problem Solved?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

BMC50 MAX32 Won't Jog after HD Replacement

BMC50 MAX32 Won't Jog after HD Replacement