hsd spindle stopped working!

Results 1 to 5 of 5

Thread: hsd spindle stopped working!

  1. #1
    shawnwrc's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default hsd spindle stopped working!

    Hi I have an HSD ES 929 10hp spindle that stopped working on a Shopsabre is510. I have tried restart, home, reboot, checked for power in the incoming cord? Thanks in advance!



  2. #2
    Member
    Join Date
    Mar 2008
    Location
    USA
    Posts
    563
    Downloads
    0
    Uploads
    0

    Default Re: hsd spindle stopped working!

    Are you able to physically move the spindle? Check that the signal from the controller to the spindle amplifier is good.



  3. #3
    shawnwrc's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: hsd spindle stopped working!

    yes, spins freely



  4. #4
    shawnwrc's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: hsd spindle stopped working!

    Shopsabre teck support is badass! They helped me in every way we checked all possibilities and they walked me throught the fix.



  5. #5
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5035
    Downloads
    0
    Uploads
    0

    Default Re: hsd spindle stopped working!

    Is there an error message on the VFD display?

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

hsd spindle stopped working!

hsd spindle stopped working!

hsd spindle stopped working!