- Need Help!- New to me machine lost ladder ht23r3
-
Member
New to me machine lost ladder ht23r3
Hi guys.
I brought a ht23r3 lathe the other day.
It had blown a board and shorted out the servo board.
I have replaced the servo board and the main board that it also killed.
Problem is although i have a copy of the parameters i cant enter them as the write key isnt working i also have no copy of the ladder.
These are the current codes im getting
F100
F506
F507
F417
F438
F466
790
795
I think the e stop errors are due to the sekos not talking to the fanuc controller.
Does anyone ( john?) Have a ladder or parameters.
Im a bit over my head and unfortunately the fanuc tech got stuck here too
Similar Threads:
-
-
Member
Re: New to me machine lost ladder ht23r3
Got your message, I’ll email you!
John
Sent from my iPhone using Tapatalk
-
Member
Re: New to me machine lost ladder ht23r3
- Need Help!- New to me machine lost ladder ht23r3
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules