VS40 TOOL CAROUSEL HOME POSITION

Results 1 to 3 of 3

Thread: VS40 TOOL CAROUSEL HOME POSITION

  1. #1
    Member
    Join Date
    May 2008
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default VS40 TOOL CAROUSEL HOME POSITION

    This mill has Fanuc 18M control. The battery was replaced on the tool carousel servo drive unit. We need a procedure to move the carousel in small increments to establish correct tool alignment and then toggle the 1815 parameter.
    Does anyone have this procedure?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2015
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: VS40 TOOL CAROUSEL HOME POSITION

    Did you get this fixed?



  3. #3
    Member Hardplates's Avatar
    Join Date
    Oct 2019
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: VS40 TOOL CAROUSEL HOME POSITION

    It's a Seicos 18M and a Fanuc 18iMa

    K000.7 is magazine handle select.

    Making this keep relay allows the MPG to operate the tool chain when placed in the 4th axis.

    Attached Thumbnails Attached Thumbnails VS40 TOOL CAROUSEL HOME POSITION-20211207_150325-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VS40 TOOL CAROUSEL HOME POSITION

VS40 TOOL CAROUSEL HOME POSITION