VS40 TOOL CAROUSEL HOME POSITION

Results 1 to 2 of 2

Thread: VS40 TOOL CAROUSEL HOME POSITION

  1. #1
    Member
    Join Date
    May 2008
    Location
    USA
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default VS40 TOOL CAROUSEL HOME POSITION

    This mill has Fanuc 18M control. The battery was replaced on the tool carousel servo drive unit. We need a procedure to move the carousel in small increments to establish correct tool alignment and then toggle the 1815 parameter.
    Does anyone have this procedure?

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2015
    Posts
    77
    Downloads
    0
    Uploads
    0

    Default Re: VS40 TOOL CAROUSEL HOME POSITION

    Did you get this fixed?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

VS40 TOOL CAROUSEL HOME POSITION

VS40 TOOL CAROUSEL HOME POSITION

VS40 TOOL CAROUSEL HOME POSITION