- Alarm 14 on HT20SII with Multi (LX3) control
-
Member
Alarm 14 on HT20SII with Multi (LX3) control
After replacing obviously blown-up servo-drive, I have this alarm.
Also NC alarms 310 (servo pwr not supplied), 547 (trt not clamped), 543 (trt index error)
drives/hydraulic mtr will not power-up.
"Multi" control (Yaskawa LX3 based)
Reviewing similar problems/posts has not fixed machine (I've tried the hold three buttons= + pwr on thing).
Main problem is probably main power to drives is not present and Z-axis is completely retracted and belt/gear assy inaccessible.
Turret is actually on station 3. Recovery page will not accept new value of 3. Currently on "1" and indicating "incorrect"
suggestions?
Similar Threads:
-
- Alarm 14 on HT20SII with Multi (LX3) control
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules