Newbie Ladder trouble

Results 1 to 6 of 6

Thread: Ladder trouble

  1. #1
    Member
    Join Date
    Sep 2008
    Location
    Romania
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Ladder trouble

    Hello all,

    I have a Hitachi seiki VK45 II with seicos M3 controller. Machine stop working a month ago , it displayed SPHC board error,no program to load. The machine only booted up in dos mode. So beeing in a hurry to fix and with no service for this machines, I drained all the batteries from the SPHC ,NUMC boards and cleared all the data PC, NC , and so on from the service menu.
    Jokes on me because I also cleared the Ladder file. Now the machine boots up normally ,the menus are in japanese. but all the buttons apart from the keyboard don't work. Before I can load the machine parameters I need to transfer the ladder back with YuYu software.
    Ok so I found a Ladder program for a 1991 VK 45 with seicos M . Will that be compatible? The other option is to buy it from Hitachi Seiki Germany.

    Thank you

    Similar Threads:


  2. #2
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Ladder trouble

    Quote Originally Posted by viorel23cnc View Post
    Hello all,

    I have a Hitachi seiki VK45 II with seicos M3 controller. Machine stop working a month ago , it displayed SPHC board error,no program to load. The machine only booted up in dos mode. So beeing in a hurry to fix and with no service for this machines, I drained all the batteries from the SPHC ,NUMC boards and cleared all the data PC, NC , and so on from the service menu.
    Jokes on me because I also cleared the Ladder file. Now the machine boots up normally ,the menus are in japanese. but all the buttons apart from the keyboard don't work. Before I can load the machine parameters I need to transfer the ladder back with YuYu software.
    Ok so I found a Ladder program for a 1991 VK 45 with seicos M . Will that be compatible? The other option is to buy it from Hitachi Seiki Germany.

    Thank you
    Hello!
    You are on the right path. As long as you hav the YuYu and the original data (or at least know what version) you’ll be ok. The VK45 and the VK45II ladders are not compatible. Send me a message with you email and I’ll assist. I have the data you are looking for.

    John


    Sent from my iPhone using Tapatalk



  3. #3
    Member
    Join Date
    Sep 2008
    Location
    Romania
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: Ladder trouble

    Thanks a lot,

    My email is viorel22cr@gmail.com

    Viorel



  4. #4
    Member Austrik's Avatar
    Join Date
    Jan 2021
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Ladder trouble

    Hi viorel23cnc
    I have hitachi seiki vk45 vmc Ladder currupted,No pack up and no YU YU software can you plese help me
    Thanks



  5. #5
    Member Austrik's Avatar
    Join Date
    Jan 2021
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Ladder trouble



  6. #6
    Member omer5022's Avatar
    Join Date
    Apr 2021
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: Ladder trouble

    HI CAN I GET YUYU SOFTWARE?
    omerreuven11@gmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Ladder trouble

Ladder trouble