numc_board sys_fail . Error on Hitachi Seiki VK45-2

Results 1 to 2 of 2

Thread: numc_board sys_fail . Error on Hitachi Seiki VK45-2

  1. #1
    Member
    Join Date
    Jun 2015
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default numc_board sys_fail . Error on Hitachi Seiki VK45-2

    Hi Guys,

    having troubles with my Hitachi Seiki VK45-2 with Seicos control. The control does not start up saying NUMC_BOARD_SYS_FAIL . Then it shows "table checksum failed". I assume that the problem is in control board and already called for a fellow guy who specialise in cnc controls but maybe some of you already have gotten such an error ?

    Similar Threads:


  2. #2
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    463
    Downloads
    0
    Uploads
    0

    Default Re: numc_board sys_fail . Error on Hitachi Seiki VK45-2

    Hello
    could be the board itself, the NUMC are faulty at times. If you are getting this alarm randomly you can try to re-seat the NUMC and see if its a connection issue. Try that and report back
    John



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

numc_board sys_fail  . Error on Hitachi Seiki VK45-2

numc_board sys_fail  . Error on Hitachi Seiki VK45-2

numc_board sys_fail  . Error on Hitachi Seiki VK45-2