Hitec-Turn HT23-SII Alarm 310 and 502

Results 1 to 1 of 1

Thread: Hitec-Turn HT23-SII Alarm 310 and 502

  1. #1
    Member
    Join Date
    Aug 2007
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Hitec-Turn HT23-SII Alarm 310 and 502

    I have a Hitec-Turn HT23-SII and cannot clear Alarm 310 and Alarm 502. We are almost certain it is some problem with the tail stock.
    Is there a parameter that we can turn off the tail stock to see if the alarms go away if the machine thinks it doesn't have them?
    Any suggestions would be appreciated. Stumped.

    Controller is a Yasnac.

    I have attached some pictures of the Alarms for reference.

    Thanks in advance for any help.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Hitec-Turn HT23-SII Alarm 310 and 502-img_1824-jpg   Hitec-Turn HT23-SII Alarm 310 and 502-img_2066-jpg   Hitec-Turn HT23-SII Alarm 310 and 502-img_1829-jpg   Hitec-Turn HT23-SII Alarm 310 and 502-img_1942-jpg  

    Hitec-Turn HT23-SII Alarm 310 and 502-img_2071-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hitec-Turn HT23-SII Alarm 310 and 502

Hitec-Turn HT23-SII Alarm 310 and 502

Hitec-Turn HT23-SII Alarm 310 and 502