SEICOS LAMBDA 10 NOT BOOT (pictires)

Results 1 to 2 of 2

Thread: SEICOS LAMBDA 10 NOT BOOT (pictires)

  1. #1
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default SEICOS LAMBDA 10 NOT BOOT (pictires)

    Hi!
    I switched on the machine (HITACHI-SEIKI HG400III, 1997) today and saw this messaged in display.
    "GRAPHIC IS READY. WAITING SERIAL BUS IS READY. SERIAL BUS IS READY. BOOT START."
    That is all. Nothing else.
    What is the problem? Memory, power ?
    The photos are in attachment.
    I don't know what to do. What to dig?

    Similar Threads:
    Attached Thumbnails Attached Thumbnails SEICOS LAMBDA 10 NOT BOOT (pictires)-photo-2019-10-10-13-55-42-a   SEICOS LAMBDA 10 NOT BOOT (pictires)-photo-2019-10-10-13-55-42-a  


  2. #2
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    218
    Downloads
    0
    Uploads
    0

    Default Re: SEICOS LAMBDA 10 NOT BOOT (pictires)

    SOLVED
    I remove the PSU from its panel, clean the contacts and mounted it back.
    All became OK. Looks like was not stable power 24v or 110v.
    The problem was solved.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

SEICOS LAMBDA 10 NOT BOOT (pictires)

SEICOS LAMBDA 10 NOT BOOT (pictires)