vk45 fourth axis add?

Results 1 to 2 of 2

Thread: vk45 fourth axis add?

  1. #1
    Member Dancy's Avatar
    Join Date
    Aug 2007
    Location
    usa
    Posts
    98
    Downloads
    0
    Uploads
    0

    Default vk45 fourth axis add?

    I have all the parts to do this. Servo motor, servo drive, cables, resistors, ect.....

    anyone know how to enable it on the machine?
    anyone know how to configure it?

    Similar Threads:


  2. #2
    Member Dancy's Avatar
    Join Date
    Aug 2007
    Location
    usa
    Posts
    98
    Downloads
    0
    Uploads
    0

    Default Re: vk45 fourth axis add?

    Some things I found....looking at the wiring seems the 4th and the X axis are connected to the same place...a typo? Maybe not. I found something in the Hitachi Maintenance manual that may imply one needs two SVIF boards. Shows a jumper that may select the function of the SVIF. (setting pins = jumpers in Hitachi speak)

    Anyone that HAS a fourth axis that could answer silly questions? Was it installed later or did the VK come that way? Do you have two SVIF boards? How are they connected?

    vk45 fourth axis add?-x-axis-jpg
    vk45 fourth axis add?-4th-axis-jpg
    vk45 fourth axis add?-maint-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

vk45 fourth axis add?

vk45 fourth axis add?