Reply with QuoteCheck Limit switches all Axis, possible Shear plate broken..if yours has them..
What happen when machine starting having problems?
HITEC TURN 25G won't start up and showing "NC UNREADY"
Dear All,
Hitec turn 25 G won't start up , after system RAM , window RAM, system ROM check, it will do the check for NC status check and then not start and showing only NC UNREADY on the screen
can anyone help
sting
Similar Threads:
- New Machine Build- How can do ""manual stepper motor sizing for "rack and pinion"calculation""???
- Please help.... "%" sign keeps showing up in code
- Problem- X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
- Posting not showing up on "New Posts" list
- Thread not showing up in the "New Post" section
Re: HITEC TURN 25G won't start up and showing "NC UNREADY"
Check Limit switches all Axis, possible Shear plate broken..if yours has them..
What happen when machine starting having problems?
Re: HITEC TURN 25G won't start up and showing "NC UNREADY"
it does not startOriginally Posted by machinehop5
Re: HITEC TURN 25G won't start up and showing "NC UNREADY"
Oil in the oil reservoir?
Sent from my SM-G950U using Tapatalk
