Hitachi Seiki HT20 has alarm

Results 1 to 3 of 3

Thread: Hitachi Seiki HT20 has alarm

  1. #1
    HTPMachine's Avatar
    Join Date
    Mar 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hitachi Seiki HT20 has alarm

    Hitachi Seiki HT20 alarm on power up
    Need help please, I have a Hitachi Seiki HT20 with Fanuc 10TF control. Machine was running great, went to power up machine and now I get a red alarm light and EMG highlighted on the bottom of the monitor screen. Pushing the hydraulic standby button will start the hydraulics but with no axis movement. I Looked at the alarm message and there is nothing showing for reason of alarm.
    I looked in manual and it states that when you get this alarm it could be that either the X or Z Axis clutches are tripped. I have checked both and they both are set correctly.
    I did check all fuses and switches on axis’s and all good.
    Would anyone know what could be causing this alarm?
    Also I checked on the dyonostic page X001 and bit 4 is 1, and on X003 bit 7 is 0.
    But manually checked Z axis clutch and it is engaged.



  2. #2
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi Seiki HT20 has alarm

    Hello
    did you get this figured out? Let me know and Ill do what I can to help!
    John



  3. #3
    Member
    Join Date
    Jan 2010
    Location
    australia
    Posts
    321
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi Seiki HT20 has alarm

    Low way lube??



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hitachi Seiki HT20 has alarm

Hitachi Seiki HT20 has alarm