hitachi seiki HTS III , seicos control corrupted

[reymoreno06]

Hi i had hitachi seiki HTS III , i was programing in mode seicos L multi the process of advances programing become freeze and i shut donw the machine when i turn on the machine the seicos cant program me again i think the mode seicos is corrupted.

i check and the machine only permit me to intoduces the drawing and make the fist process o machine but can not proced to make second operations , threads, drill only the machine permit me to do one operation

i hope some one help me to fix this problem

[shas595]

Hello

sounds like you need to do a regeneration of the control. Send me a message with your email address and I can help you out
John

[reymoreno06]

thanks John for your support

my email is: reynaldogarcia1@hotmail.com

[reymoreno06]

thanks John for your support

my email is: reynaldogarcia1@hotmail.com

[shas595]

Hello

I sent you an email - take a look, or PM me for my contact info

John

[jratko]

Hello

sounds like you need to do a regeneration of the control. Send me a message with your email address and I can help you out
John

Hello

We have problem with backup batery for ram on hitachi Seicos L Multi control.
Can You help us to restore memory on this control.
My Email is jratko@yahoo.com

thanks

[jratko]

Hello

I sent you an email - take a look, or PM me for my contact info

John

Hello

We have problem with backup batery for ram on hitachi Seicos L Multi control.
Can You help us to restore memory on this control.
My Email is jratko@yahoo.com

thanks

[mayelo82]

thanks John for your support

the problem was solved