- Hitachi Seikis VK45 II - Seicos M3 - Error 867
-
Member
-
-
Member
Re: Hitachi Seikis VK45 II - Seicos M3 - Error 867
Enrico
did this machine ever have a 4th axis do you know?
John
-
Member
Re: Hitachi Seikis VK45 II - Seicos M3 - Error 867
No, this machine never had the 4th axis
E.
-
Member
Re: Hitachi Seikis VK45 II - Seicos M3 - Error 867
Enrico
unplug and reconnect all cables on the servos to be sure they have good connection. That is my first guess; if it never had it it might have a loop connector. Simple test before we get more into it
John
-
Member
Re: Hitachi Seikis VK45 II - Seicos M3 - Error 867
John
I've already test every single cable from SASS11 to the spindle's inverter, everything is ok.....
I start thinking that for 4th axis the control means "the axis" of rigid tapping ( in this case )
I'll do more test with cable, but now i need to work. Do you know if is possible to deactivate the 4th axis?
I must do some urgent works ( without tapping ), and then i can get more on it
Enrico
- Hitachi Seikis VK45 II - Seicos M3 - Error 867
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules