- Hitachi Seiki HT20 SII - not enough memory for program
-
Registered
Hitachi Seiki HT20 SII - not enough memory for program
Hello,
I've got Hitachi Seiki HT20 SII CNC turning machine. Today I've tried to send some programs to memory via RS232. All works ok, so I cleared all the memory and tried to send longer program, about 560 lines (generated with CAM). And there is a problem, the memory is not enough for this program. It's a big problem for me, because I often turn complicated combinations of radius, and using CAM is only option. Moreover, I think 560 lines is not a long program, sometimes I use few thousands lines.
So the question is - is it possible to extend the memory? Or use some external?
Please help me
Similar Threads:
Last edited by Dudi1203; 12-06-2017 at 03:24 PM.
-
-
Member
Re: Hitachi Seiki HT20 SII - not enough memory for program
Hi, I have same problem did you sorted out ?
Thanks
-
Member
Re: Hitachi Seiki HT20 SII - not enough memory for program
Hello
it is possible, send me a PM with you email and I will assist
John
-
Re: Hitachi Seiki HT20 SII - not enough memory for program
????????????. ? ???? ?? ?? ???????? ? ???????. ?? ?? ???????. ?????? Hitachi seiki vk45II. ??????? ?????? ?
- Hitachi Seiki HT20 SII - not enough memory for program
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules