Hitachi Seiki Repair / Service / Support

[shas595]

John
Searched lot but I Didn’t understand Haw to make PM can you please reword me on sanketalhat007@gmail.com

No worries, I just sent you an email


Sent from my iPhone using Tapatalk

[univerzalko]

Hello i'need to set spindle orientation on Hitachi Seiki yasnac i80 can you help me please?

[shas595]

Hello i'need to set spindle orientation on Hitachi Seiki yasnac i80 can you help me please?

Hello!
What is the machine model you are trying to set on?
John


Sent from my iPhone using Tapatalk

[univerzalko]

Hello it's VM 40 yasnac i80
Hoffman year1995.

[univerzalko]

John I can't find PM can jou please contact me on my mail
info@strojetehna.si
Thanks

[Austrik]

Hi SHAS 595
I have hitachi seiki vk45 vmc Ladder corrupted,No pack up and no YU YU software can you please help me(AUSTRIKENGINEERING@GMAIL.COM)
Thanks

[Austrik]

Hi DANCY
I have hitachi seiki vk45 vmc Ladder corrupted,No pack up and no YU YU software can you please help me(AUSTRIKENGINEERING@GMAIL.COM)
Thanks

[Austrik]

HI*I have a hitachi seiki vk45 vmc Ladder corrupted*and no backup and no softwarecan you please*help me

[MABCRA]

Hi John,

Please is possible to get your E-mail and phone details also.

Thanks Mike

[shas595]

Hi John,

Please is possible to get your E-mail and phone details also.

Thanks Mike

Mike
Send me a PM with your details, I’m also on Skype - shas595


Sent from my iPhone using Tapatalk

[Reliablemachine]

This is my first post so please excuss me if i am doing it wrong.
We have a hs400 that we lost all software on, Is there anyone who can help with this that you guys are aware of? Any help would be appreciated!

[shas595]

This is my first post so please excuss me if i am doing it wrong.
We have a hs400 that we lost all software on, Is there anyone who can help with this that you guys are aware of? Any help would be appreciated!

Hello!
Send me a PM with your email and I’ll help out.

John


Sent from my iPhone using Tapatalk

[ph0ngvu]

Hello John,
I've sent you PM about my Hitachi Seiki HT-25G. It stucks on boot up.

[ivan360]

Hello everyone,

We have a Hitachi Seiki HC400 with Fanuc 15M controller, 3 axis, 1 index axis, 2 changing pallets. RAM got completely corrupted, so we needed to clear it up completely.

We had a backup of the NC parameters and tool changing programs, but unfortunately lost the PMC/ PC parameters, including the Timers, Couters, Keep Relays, etc.

Does anyone has access to the same machine or to a backup of these parameters? That would be extremely helpfull.

Thanks.

[shas595]

Hello everyone,

We have a Hitachi Seiki HC400 with Fanuc 15M controller, 3 axis, 1 index axis, 2 changing pallets. RAM got completely corrupted, so we needed to clear it up completely.

We had a backup of the NC parameters and tool changing programs, but unfortunately lost the PMC/ PC parameters, including the Timers, Couters, Keep Relays, etc.

Does anyone has access to the same machine or to a backup of these parameters? That would be extremely helpfull.

Thanks.

Hello

Send me a PM with your e-mail and I’ll help you out - Assuming its an HC400 with the Micon 16-II data you are missing

John


Sent from my iPhone using Tapatalk

[DYNNAMICMACHININGCNC]

All,

I have decided after many requests to start doing on-site service locally (in the New England area). I can be contacted via email (PM me with info) and respond very quickly, and if the problems get more intricate, I can offer help by phone. If that doesn't help then I can make the trips. I have been servicing these machines for many years and are familiar with the i80, MX3, LX3, Seicos II & III, Micon II & III, Sigma 16, 18 & 21, Fanuc RC4/RB6 (and many other Fanuc based), J300 and the very fun Lambda 10L/40L controls. I have many parts available as well as software (ladders, EPROM programs, parameters) to help you out in any situation. Contact me anytime; I have helped many many people get their machines up and running both in the US and abroad.

John

Hey John
I have a Hitec-turn23J with a yasnac J300L and Im getting this message. Adjust. of zero-pt.dog is reqd.
when im trying to set the zeroset in Maintenance Guide. If You can help me out that would be great.

Thank you
Erik

[ivan360]

I just sent you the PM.

Thanks.

Ivan.

[shas595]

Hey John
I have a Hitec-turn23J with a yasnac J300L and Im getting this message. Adjust. of zero-pt.dog is reqd.
when im trying to set the zeroset in Maintenance Guide. If You can help me out that would be great.

Thank you
Erik

Send me PM with your e-mail and I’ll get you going, there’s a simple procedure you need to to , pretty straightforward

John


Sent from my iPhone using Tapatalk

[Abhilash9880]

Mr john plz send me your contact number and email address plz

i need your help my machine in problem

Thank you
Abhilash
Sreevaarucnctech@gmail.com

[Billet Carb]

I could use some help too.
Johndam@dambest.com