I have a problem connecting the computer to the machine

Results 1 to 2 of 2

Thread: I have a problem connecting the computer to the machine

  1. #1
    Member Salah7701's Avatar
    Join Date
    Apr 2021
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default I have a problem connecting the computer to the machine

    have a Bridgebort vmc 760/20 machine with Haidinhain TNC 2500 system, and when I connect it to the computer via the TNCremo program, the phrase (EXT. IN- / OUTPUT NOT READY) appears in the machine screen, although I made all the settings in the Manual,Knowing that it shows me in the TNCremo program that the cable is ready.

    Similar Threads:


  2. #2
    Member BRAIN-HURTS's Avatar
    Join Date
    Jul 2020
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: I have a problem connecting the computer to the machine

    Try going into programme and edit mode and then press the PGM MGT button, then press the EXT soft key and chose an option there.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

I have a problem connecting the computer to the machine

I have a problem connecting the computer to the machine