Tnc 355 drip feed

[mc255]

Hello,

I would like to transfer long programs to my TNC 355 (<1000 lines).
At the moment I can already transfer small programs (with TNCServ and RS-232 interface).

I've already spent some time trying to find a solution, but I don't really know where to go.

Does anyone know which parameters to change? Is it possible to use the TNCServ?

Thank you in advance!

Similar Threads:

• Need Help!- IMA 210 CNC Drip Feed
• Need Help!- DNC/Drip Feed
• Need Help!- drip feed
• Drip feed?
• Drip Feed

[machinehop5]

...this may help
https://www.easydnc.com/cnc-machine-...eidenhain.html

[mc255]

Thanks for the help!
After a day of research and testing, I think I've found the solution.
For people who have the same problem, here is the configuration I used and that seems to work:

On TNCServ:
Protocol: FE
Serial port: depends on your pc
Baud rate: 9600

On the TNC 355 :
Protocol: FE
Baud rate: 9600
MP 218: 17736
MP 219: 16712
MP 220: 279
MP 221: 5382
MP 222: 168
MP 224: 4

To load the program : -> "step mode key" or "continuous mode key" -> EXT-key -> type the program name -> the program will load -> GOTO-key to navigate through the lines.