HELP Transfer Heidenhain 410PA

Results 1 to 2 of 2

Thread: HELP Transfer Heidenhain 410PA

  1. #1
    Kosaf11's Avatar
    Join Date
    Oct 2018
    Posts
    0
    Downloads
    0
    Uploads
    0

    Question HELP Transfer Heidenhain 410PA

    Hello!
    Machine: Bridgeport 600/22 Digital milling machine
    Controls: Heidenhain 410PA PLC: 12D01V12 NC: 286060 15

    Please help. I am trying to send programs from a computer to a machine.
    The machine has an RS 232 interface. No Ethernet / Lan.
    - I connect the cable to the machine and computer (RS232- USB2.0)
    - I'm running TNCremo
    - I set the folder, 410PA control, Protocol Send / Receive (FE), Serial port: COM5, Baud rate 9600. I have the same settings on the machine. (FE, 9600).
    - status at tnc server Ready
    - I enter the Edit> PGM MGT> EXIT on the machine
    - I press Transfer EXIT> TNC
    - I enter the name of the program to control identically as in the computer, eg: wymiar (extension .h is already in the window)
    - confirm ENTER
    And here is the problem. The file is not transmitted. Machine control stands. TNCserver status - Ready.
    What button on the control will press the Key non-functional message.
    Only when I disconnect the cable, the machine runs normally and the message Entry value incorrect is displayed.

    I got under control by avoiding the port at the front of the machine. - the same situation as the above control does not help.
    I've crossed two cables. - did not a
    I exchanged a small plate next to the port in the machine. - did not help
    This set works on another machine without the slightest problem. (Bridgeport 600/22 HH 410)

    Please help

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2007
    Location
    MEXICO
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: HELP Transfer Heidenhain 410PA

    HI. DO YOU SOLVE THIS . I HAVE THE SAME.
    THANKES IN ADVANCE FOR YOUR HELP.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

HELP Transfer Heidenhain 410PA

HELP Transfer Heidenhain 410PA