- Tnc 530, axis won't move to reference,no alarm
-
Member
Tnc 530, axis won't move to reference,no alarm
Who can help? Machine: mag 5 axes. Control itnc 530. When the machine is turned on, the control turns on, everything looks normal on the screen. At the stage when the axes need to be sent to a reference point. Press start (square green button). Nothing happens, there is no movement of any axis. There is also no Error message. We have been trying for two days without success. Thanks for your help.
Similar Threads:
-
-
Member
Re: Tnc 530, axis won't move to reference,no alarm
stupid question- does the feed potentiometer set for more than 0?
Does the machine have brakes on axes? Do it's symbols disappear when u try to move?
Is it possible that firs axis to move is standing on it's limit switch?
Try to move it in oposit direction manually (manual movements should be available without reference with minimal speed).
- Tnc 530, axis won't move to reference,no alarm
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules