TNC407 Machine Parameter Save

Results 1 to 3 of 3

Thread: TNC407 Machine Parameter Save

  1. #1

    Default TNC407 Machine Parameter Save

    Dear community,

    i have a TNC407 control unit removed from working Hermle machine, and i want to play with them connected on the desktop (i connected monitor, control unit, and control panel, and powered with 24VDC) .
    After months of staying without power, the backup battery is empty and i think a machine parameter are lost.
    When i turn on the control unit i see the attached screen. I cant change the screen, just jump in parameter list.
    TNC407 Machine Parameter Save-img_20200401_223102293-jpg
    The controller needs to fill with parameters. I put new battery in the controller and try to fill the parameters.
    But i dont know how to save it. When i change for ex. language parameter 7230 - German to English, the controller execute it, and change the language, but after restart the controller, the language is again German, that means the parameter not saved.

    Can you help me how to save parameters in eeprom?
    Maybe together with parameter, the NC and PLC program is lost? I dont have the original parameters, but i dont need them, because the controller is not connected to machine.
    I just want to start the controller in regular working mode, to try writing programs, view menus etc.
    TNC407 Machine Parameter Save-img_20200330_213018577-jpg

    Thanks for answer.
    Best Regards.
    Attila.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails TNC407 Machine Parameter Save-img_20200401_223102293-jpg   TNC407 Machine Parameter Save-img_20200330_213018577-jpg  


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    Poland
    Posts
    322
    Downloads
    0
    Uploads
    0

    Default Re: TNC407 Machine Parameter Save

    there is no need to save the parameter after it's changed.
    If the parameters resets after turning of the control it mean's that there is no baterry supply. there may be lack of contact on baterry terminal or some other problem.



  3. #3
    Member
    Join Date
    Apr 2015
    Posts
    170
    Downloads
    0
    Uploads
    0

    Default Re: TNC407 Machine Parameter Save

    You will also need to wire in the fixed emergency stop to provide a 24v input to the correct input pin because the resultant error code will make it unusable without an active Estop circuit. It is all in the manual that you can download for free. Dave



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TNC407 Machine Parameter Save

TNC407 Machine Parameter Save