- problem-Gross Positioning error c in z axis
-
Member
problem-Gross Positioning error c in z axis
Hello.
I'm a new bridgeport interact 2 users.
When i power on machine.It starting and Referenced but after z axis move
it stop and show error "gross position error c " and position on monitor not changed ,but z axis before stop , moves about 5 centimeter.
I changed x and z axis servo but again machine error "gross position error c " after moving z axis.
anybody can help me.
Similar Threads:
-
-
Member
Re: problem-Gross Positioning error c in z axis
What control system is it? (smells like heidenhain)
Did U check the easuring elements connection (encoders)?
-
Member
Re: problem-Gross Positioning error c in z axis
tnc 151.Yes i change z and x servo encoder and again same error.
-
Member
Re: problem-Gross Positioning error c in z axis
Did U replace encoders itself or with motors,
This error may be caused by losening the encoders axis clutch from the screw.
Letter C not necessary means Z axis.
- problem-Gross Positioning error c in z axis
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules