TNC 355 B - PLC program

Results 1 to 4 of 4

Thread: TNC 355 B - PLC program

  1. #1


  2. #2
    Andyruss's Avatar
    Join Date
    Apr 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: TNC 355 B - PLC program

    I used to write the PLC programs for these machines for the importer in melbourne. If you can send me some contact details i should be able to help you either with the original PLC program or an alternative one. Where are you located?



  3. #3
    Member stzvue's Avatar
    Join Date
    Jan 2020
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: TNC 355 B - PLC program

    Hello All,

    Can anyone share the PLC program and PLC parameters for a SWH UF41 HDH TNC355b 1991year of construction?

    Thank you in advance.

    Vladimir



  4. #4
    Member
    Join Date
    Dec 2006
    Location
    Australia
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: TNC 355 B - PLC program

    Hi there, I have a similar problem, lost the PLC program after the 24v power supply failed. batteries had low voltage and didnt save it. Its a kasuga TC-100 with heidenhain TNC415b controller, has tool changer, was originally sold to Trico by Internation Machine Tools. IMT.
    in the early 90's. Any help is welcome. contact me at kevin@grating.com.au . Cheers,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TNC 355 B - PLC program

TNC 355 B - PLC program