touch with a 3d sensing device?

Results 1 to 2 of 2

Thread: touch with a 3d sensing device?

  1. #1
    MSMS's Avatar
    Join Date
    Dec 2007
    Location
    Nördlingen
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default

    Hello everyone,

    How can I touch a work piece that is clamped on the rotary table in a titled way (e.g. not parallel to the X axis) with a mechanic 3D sensing device? The controller needs to know that it should adjust the part e.g. parallel to the X axis. Controller has G7!

    So far I only worked on a Phillips 432 with rigid table.

    Many thanks in advance for your answers.

    Regards Manne



  2. #2
    cgTNC's Avatar
    Join Date
    Nov 2010
    Location
    Braunschweig
    Posts
    1317
    Downloads
    0
    Uploads
    0

    Default

    I don’t know a suitable machine function for a mechanic sensing device.


    Solution:
    Touch two points, note down the position, calculate the angle with the calculator and set the corresponding zero point of the C axis.

    You can calculate the angle of the controller with ICP.

    -> Open a new program in the editor, enter 1st point in XY, dress soft key ICP, select diagonal line and enter 2nd measuring point. The angle will then be displayed on the screen. G7 won’t be needed.

    Regards
    cgTMC



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

touch with a 3d sensing device?

touch with a 3d sensing device?

touch with a 3d sensing device?