open the door M0

Results 1 to 3 of 3

Thread: open the door M0

  1. #1
    Registered Parametisierer's Avatar
    Join Date
    Oct 2008
    Location
    Berlin
    Posts
    22
    Downloads
    0
    Uploads
    0

    Default

    I am looking for a possibility to automatically open the door at M0. Is there a not documented M command for that?
    THANK YOU



  2. #2
    Registered SKa-W's Avatar
    Join Date
    Nov 2011
    Location
    Rennertshofen
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    As far as I know, it only possible to adjust it in the machine parameters.

    Our DMU50 opens e.g. the door automatically with M0, however machines from the 60s and 80s keep the door closed with M0.
    I am not aware of a not documented M command.

    Kind regards
    SKa



  3. #3
    eckitsch's Avatar
    Join Date
    Aug 2007
    Location
    Suhl
    Posts
    411
    Downloads
    0
    Uploads
    0

    Default

    Hi

    Until the V530 there is a machine constants that is responsible for it - however I cannot tell you what it’s called at the moment.
    From the V600 onwards the opening of the door with M0 is controlled over the machine parameter „MS_CabinDoor_with_M00_open“.

    With G322 N5="CfgOemBool:MS_CabinDoor_with_M00_open:val" O2=1 (possible at the end value) you can read out the condition.

    In Parameter ES1 either “true” or ”false” is displayed.

    You can change the parameter over the USER-MOD function.

    Regards



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

open the door M0

open the door M0