change machine constants

Results 1 to 2 of 2

Thread: change machine constants

  1. #1
    Registered Stephan89's Avatar
    Join Date
    Nov 2007
    Location
    Reichersbeuern
    Posts
    47
    Downloads
    0
    Uploads
    0

    Default

    Hello

    We have a DMU 50v with Millplus v400.

    I have the following problem:

    Over the tool magazine is the air nozzle which blows off the magazine in particular intervals.
    On our machine it’s every 20 seconds. We have found the value in the machine constants but we can not change it somehow..

    So my question: how can I change that value?



  2. #2
    Michael Hartung's Avatar
    Join Date
    Sep 2004
    Location
    KS
    Posts
    161
    Downloads
    0
    Uploads
    0

    Default

    With our DMU125P you first have to flick a switch in the switch cabinet. You find it with 2 further switches for emergency operation and end bridging operation..
    Regards

    Michael



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

change machine constants

change machine constants