hello machining,
yes should be possible - for more info cast a look in the help of TNCremo and search for the function overview.
Also> HEIDENHAIN CDS Lite <should be suitable.
Hello people
I've got a problem.
Can I transfer data with TNC Cremo from a MillPlus controller to a laptop?
Or do I need another software? If so which one?
Hope someone can help me.
We only had TNC 530 for a very long time and are complete new to MillPlus.
Thanks for your help.
regards
hello machining,
yes should be possible - for more info cast a look in the help of TNCremo and search for the function overview.
Also> HEIDENHAIN CDS Lite <should be suitable.
Gruß / Regards
CNCFanatiker
AdminCrew
Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.
If we always this act what we are able to do, then we always remain what we are.
I can recommend CDS Lite, I use it on a DMU 80T with Mill Plus controller and have made really good experiences with it...