- V600, support pictures
-
Hello
I have written a cycle for our DMU, which I saved in a cycle folder plus the controller file and the pictures. The cycle got recognized and the G commands integrated into the list. In the dialogue modus all parameters are displayed , the mandatory ones and the ones “free of choice”!
Only the page of the picture is black.
And thats the problem. I tried out all formats that I know (.bmp, .jpg, .png und .svg). The simulator displays all formats, however on the machine it stays black. In what format should the pictures be produced? ( length, width, any parameters)
Regards
eckitch
-
-
hello
I had the same problem on the V5xx. I solved the problem by copying a picture from the Millplus
Winshape Simu.
Then you have the correct format, after change the name of the picture , open it with MS Paint, delete all and insert the graphic.
Thats how I got it to work.
What cycle did you programed?
Regards
Millman
-
Hi Millman
I solved the problem and all pictures can be displayed correctly. The problem was the path, the system
device was not C – it was V:". I chose (.svg) as my format
I created a plan cycle. I just cant like the G 792 cycle. My cycle goes in a kind of spiral. The tool always stays in the cut. And I can choose if its a plan milling cycle or stud cycle.
- V600, support pictures
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules