MILLPLUS V400 gateway disconnected

Results 1 to 3 of 3

Thread: MILLPLUS V400 gateway disconnected

  1. #1
    Registered CADBAER's Avatar
    Join Date
    Jan 2011
    Location
    Halstenbek
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default

    I urgently need your help.
    We bought a 10-year-old DMU80T with controller MILLPLUS V400.

    When we try to start it up, the error I01 (gateway disconnected) occurs.
    Turning on with the Clear button and the main switch remains ineffective.

    What gateway is meant? How can the problem be solved?

    I’d appreciate your help.
    I’ll also post the solutions



  2. #2
    narator's Avatar
    Join Date
    Dec 2007
    Location
    Bayern
    Posts
    198
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Is the emergency switch in its initial position?
    Then, do you press the switch button first and immediately after that the CE-button?

    You have seen the machine in action, haven’t you?

    Greetings



  3. #3
    steff_ndb's Avatar
    Join Date
    Dec 2007
    Location
    Bayern
    Posts
    146
    Downloads
    0
    Uploads
    0

    Default

    Hello

    Exactly, first you should check up, whether the emergency switch is out, also at the hand wheel! I’ve once searched for it until I was blue in the face cause I hardly ever use it.

    Then, I had to open and close the door in order to lock up the door switch!

    And then press the main switch and F10 at the same time. It should work then.

    Regards, Steff



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

MILLPLUS V400 gateway disconnected

MILLPLUS V400 gateway disconnected