Heidenhain in DIN/ISO

Results 1 to 2 of 2

Thread: Heidenhain in DIN/ISO

  1. #1
    Registered Miggel's Avatar
    Join Date
    Mar 2009
    Location
    Freiburg
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Hi

    Does anybody know how I can convert a cycle program from ManualPlus 620 into DIN/ISO so that I would see the base clauses (each separate clause of the cycle)?

    I only see the DIN/ISO cycle with SmartTurn.

    But I have to change the cycles a little bit. It would be too complexly to program the contour in DIN.

    Maybe there’s a program or a tool that would do it for me??

    Miggel



  2. #2
    Registered Miggel's Avatar
    Join Date
    Mar 2009
    Location
    Freiburg
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Doesn’t anybody have a clue?



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Heidenhain in DIN/ISO

Heidenhain in DIN/ISO