Network connection with manual turn

Results 1 to 2 of 2

Thread: Network connection with manual turn

  1. #1
    gravie's Avatar
    Join Date
    Dec 2005
    Location
    Hollenbach
    Posts
    61
    Downloads
    0
    Uploads
    0

    Default

    How does it work?
    According to the machine manufacturer, it won’t work until a newer software update. But we could access the menu for network settings for TCP/IP so it has to be unlocked.

    Is there a manual therefore and do we have to connect a keyboard therefore?



  2. #2
    Registered VolVo's Avatar
    Join Date
    Dec 2002
    Location
    Aachen
    Posts
    433
    Downloads
    0
    Uploads
    0

    Default

    I don’t know what software update our machine has. But I’m sure that I had to connect a keyboard for configuration.
    It was quite easy in our case. I just had to unscrew the screws that held the monitor (industry PC) and so I could access the connectors.

    Good luck
    Volker



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Network connection with manual turn

Network connection with manual turn