check the PLC status in the tool table (set of the 0 and 1 numbers for each tool) the difference may be there or in the MP's, but i'm not sure which one is it.
Hello,
I have a question about the touch probe,
iTNC530
machine brand YCM, Nsv and other type.
here is the problem, we have recently stated too lock the guard doors and the operator cant use the probe with doors open.
but one machine can do this ( Matec).
so i was thinking, is this some way to fix this
with the security still working as it sopouse to .
sorry for my bad english.
Mr Larsson from Sweden
Similar Threads:
check the PLC status in the tool table (set of the 0 and 1 numbers for each tool) the difference may be there or in the MP's, but i'm not sure which one is it.
thanks steryd
i will check that tomoroow
update
we did check and it was the same in all machines ?
that didnt work
thank you for replying.
well its easy to cutout the guard door but we will not go back to that
thats what we have been doing for many years and its ilegal hehehe.
trying to do the right thing here