I normally set up a helical lead-in in my CAD program. Normally just uses G1 moves, don't know if your machine has a canned cycle for that.
Hi everybody,
HELP!! Can someone tell me if you can Helical Mill on a Heidenhain 410 control?
I've had a machine go down(Acramtic 2100) and i need to do some work on my Heidenhain 410
I'm trying to Helical Mill a 38mm dia x 47mm deep hole.
Any help would be most gratefull
Steve
Similar Threads:
I normally set up a helical lead-in in my CAD program. Normally just uses G1 moves, don't know if your machine has a canned cycle for that.
Jim Dawson
Sandy, Oregon, USA
Thanks Jim,
Will give that a go
Steve
L X0 Y0 R0 F MAX
L Z+3 R0 F MAX
CC X0 Y0
LP R+19 A0 RL F1000
LBL 1
CP IPA+360 IZ-2 RL F300
LBL CALL 1 REP 24/24
CP IPA+360 RL F300
LP R0 A0 R0 F300
L Z100