Helical Milling

Results 1 to 4 of 4

Thread: Helical Milling

  1. #1
    Member Wurzell's Avatar
    Join Date
    Sep 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Helical Milling

    Hi everybody,

    HELP!! Can someone tell me if you can Helical Mill on a Heidenhain 410 control?

    I've had a machine go down(Acramtic 2100) and i need to do some work on my Heidenhain 410

    I'm trying to Helical Mill a 38mm dia x 47mm deep hole.

    Any help would be most gratefull

    Steve

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Helical Milling

    I normally set up a helical lead-in in my CAD program. Normally just uses G1 moves, don't know if your machine has a canned cycle for that.

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member Wurzell's Avatar
    Join Date
    Sep 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Helical Milling

    Thanks Jim,

    Will give that a go

    Steve



  4. #4
    Member
    Join Date
    Dec 2023
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Helical Milling

    L X0 Y0 R0 F MAX
    L Z+3 R0 F MAX
    CC X0 Y0
    LP R+19 A0 RL F1000
    LBL 1
    CP IPA+360 IZ-2 RL F300
    LBL CALL 1 REP 24/24
    CP IPA+360 RL F300
    LP R0 A0 R0 F300
    L Z100



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Helical Milling

Helical Milling