Sample Face Milling Program with Q Parameters

Results 1 to 2 of 2

Thread: Sample Face Milling Program with Q Parameters

  1. #1
    Member
    Join Date
    Dec 2010
    Location
    Almont, Mi, USA
    Posts
    152
    Downloads
    0
    Uploads
    0

    Default Sample Face Milling Program with Q Parameters

    I am trying to set up a simple face milling program using Q parameters to be used on a tnc426(no face milling canned cycle). Can anyone provide any samples or a place to start? I have the manual and am trying to put something together for an apprentice to just square and size blocks.

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2012
    Location
    Australia
    Posts
    215
    Downloads
    3
    Uploads
    0

    Default Re: Sample Face Milling Program with Q Parameters

    Regards Bob


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sample Face Milling Program with Q Parameters

Sample Face Milling Program with Q Parameters