machine is crazy

Results 1 to 5 of 5

Thread: machine is crazy

  1. #1
    Registered Dyscha's Avatar
    Join Date
    Mar 2012
    Location
    Kleinstadt
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default

    Hey
    My machine is crazy at the moment. When I get the chamfer countersink out to mill the drill holes with it, the machine suddenly stops and the program breaks off.

    The note “external Emergency Stop” or the speed decreases from 6000 to 2000.

    What could be the reason for this?



  2. #2
    Registered bullet01's Avatar
    Join Date
    May 2009
    Location
    Buchstehude
    Posts
    1352
    Downloads
    0
    Uploads
    0

    Default

    Hello

    These details are not enough- what machine, controller have you got?

    Does it happen with every single program or only particular ones?

    Are there any other (more exact) error messages?



  3. #3
    Registered Dyscha's Avatar
    Join Date
    Mar 2012
    Location
    Kleinstadt
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default

    Machine: Mikron VCP 1000

    Controller: Heidenhain TNC 430

    The program is generalized and usually runs without problems. Only with the chamfer countersink these problems occur. The error messages are various. Sometimes the protection door is open or external emergency stop comes up or even no error message- then the engine speed just decreases. I often have problems to close the door, the machine always shows the error “protection door component part”.



  4. #4
    GreenVeltlins77's Avatar
    Join Date
    Jun 2005
    Posts
    455
    Downloads
    0
    Uploads
    0

    Default

    How large is your "chamfer countersink"?
    Maybe it has too much power.

    Regards
    Sven



  5. #5
    CNCMarci
    Guest

    Default

    I don’t think that it’s because of the size.

    Maybe the door protection switch has a loose connection in the cable or maybe it doesn’t close properly anymore.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

machine is crazy

machine is crazy