Build Thread Yet another Hardinge Accuslide


Results 1 to 4 of 4

Thread: Yet another Hardinge Accuslide

  1. #1
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    48
    Downloads
    2
    Uploads
    0

    Default Yet another Hardinge Accuslide

    I recently picked up a Hardinge AHC that's been fitted with an Accuslide. The parameters were lost when the batteries died, the spindle encoder is bad and the VFD is DOA. Good candidate for a retrofit 8-) .

    These pictures are at the shop where I got it. My quarters are too cramped to get a good full on shot. Some parts have already showed up so hopefully progress will be quick.

    Got the acorn up and ran through the initial setup. Also the motors/drives and did the initial tune on them also.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Yet another Hardinge Accuslide-118410146_10223936124935699_8909415589281684242_o-jpg   Yet another Hardinge Accuslide-118470992_10223936123295658_4054909559704013473_o-jpg   Yet another Hardinge Accuslide-118581125_10223936123575665_8309720820276694305_o-jpg   Yet another Hardinge Accuslide-118380845_10223936124895698_7263096148510119702_o-jpg  

    Yet another Hardinge Accuslide-118470992_10223936121655617_3846109422081069655_o-jpg   Yet another Hardinge Accuslide-118326669_10223936123815671_9075096952726316434_o-jpg   Yet another Hardinge Accuslide-20201125_111228-jpg   Yet another Hardinge Accuslide-20201125_111232-jpg  



  2. #2
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    48
    Downloads
    2
    Uploads
    0

    Default Re: Yet another Hardinge Accuslide

    I got the computer mount moved back to give me a little more room to move around.
    The box is cleaned out.
    New face plate made and mounted. There will be another over this one for the monitor. I plan to mount the drives to the back of this plate.

    Yet another Hardinge Accuslide-20201126_090802-jpg

    Yet another Hardinge Accuslide-20201126_090825-jpg

    Yet another Hardinge Accuslide-20201126_095754-jpg



  3. #3
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    48
    Downloads
    2
    Uploads
    0

    Default Re: Yet another Hardinge Accuslide

    Little more progress yesterday.

    Drives mounted
    Monitor mounted to faceplate and then mounted to the box
    Made a small bracket to hold the computer and USB ports - trying not to penetrate the outer shell if I can avoid it.

    Yet another Hardinge Accuslide-20201126_095811-jpg

    Yet another Hardinge Accuslide-20201126_110615-jpg

    Yet another Hardinge Accuslide-20201126_115710-jpg



  4. #4
    Member
    Join Date
    Jan 2012
    Location
    USA
    Posts
    48
    Downloads
    2
    Uploads
    0

    Default Re: Yet another Hardinge Accuslide

    Got a little more done in both cabinets. Still need to do some wire management but lights are coming on and flashy things are flashing!

    Yet another Hardinge Accuslide-20201204_134042-jpg

    Yet another Hardinge Accuslide-20201204_134051-jpg

    Yet another Hardinge Accuslide-20201204_134121-jpg



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Yet another Hardinge Accuslide

Yet another Hardinge Accuslide