Need parameters hardinge quest 6/42 build in 2003


Results 1 to 6 of 6

Thread: Need parameters hardinge quest 6/42 build in 2003

  1. #1
    Member
    Join Date
    Apr 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Need parameters hardinge quest 6/42 build in 2003

    Hello all
    Just bought myself a hardinge quest 6/42 from a auction in Germany.
    It is a ex us army Lathe with only 51 hours on the counter.
    How this thing gets here in Europe I don't have a clue.
    But now it's mine.
    The backup battery is dead so I got a sram error.
    And I only have a manual not a backup.
    Can anyone here provide me with some parameters that might get the machine back working again.
    Thanks in advance.

    Kind regards from Holland

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    355
    Downloads
    0
    Uploads
    0

    Default Re: Need parameters hardinge quest 6/42 build in 2003

    Is it possible someone Stored the Par's on the HDD?
    I see there is more than one Battery also. You didn't say what control you have but, I assume its Fanuc
    http://www.hardingeservice.com/usr/Q...09500-0392.pdf

    Battery replace on pdf page 41
    http://www.hardingeservice.com/usr/Q...09500-0394.pdf



  3. #3
    Member
    Join Date
    Apr 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Need parameters hardinge quest 6/42 build in 2003

    The control is a 21it and does not have a HDD.
    So i'm hoping on some parameters from you guys
    There also might be a problem with the card reader because it won't read the card.
    I have a original Fanuc Compact flash card 128MB.
    I use this in my Hardinge GS250MSY with fanuc 18i control and there it works.
    The machine is 5 years younger so there might be the problem.
    So now i'm also figuring out if the control is the problem or the card.
    I was looking at a post from someone on the internet the early fanuc 21it have problems with reading large Compact flash cards.
    They advice a maximum 16mb Sram compact flash.
    So there is some work more to do, then only get me the parameters.



  4. #4
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    405
    Downloads
    0
    Uploads
    0

    Default Re: Need parameters hardinge quest 6/42 build in 2003

    I would have thought it was the card reader I'll check my system and private message you



  5. #5
    Member
    Join Date
    Apr 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by mbservice View Post
    I would have thought it was the card reader I'll check my system and private message you
    That would be great I assume you don't try it on a quest Lathe!



  6. #6
    Member
    Join Date
    Apr 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default

    Nobody? The machine is build in the USA so this is the right place right!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need parameters hardinge quest 6/42 build in 2003

Need parameters hardinge quest 6/42 build in 2003

Need parameters hardinge quest 6/42 build in 2003