Parameters & custom macros for CHNC II SP

[shannonrm0]

Hi all, apologies for bringing up yet again what seems to be a never ending topic in this forum, Parameters.

I have just bought a CHNC II SP with Fanuc 10TF control. From a mechanical/electrical/pneumatic viewpoint, all appears to be well.

However, the machine came with no software backup or a list of parameters that should be set. I have jotted down all the parameters I can find, but it would be nice to compare what the machine currently has vs. what it should have - some parameters may have been played with in the last 35 years! Does anyone have a parameter settings list for this machine please? I have been trying to find one via eBay for some time, but no luck so far.
Also, it would appear that the built-in custom macros have been deleted at some point in its history (custom macros 9120 - 9150). I guess I could work around their absence, but they would be nice to have. Does anyone have these handy please?

Thanks ,
Richard

Similar Threads:

• Need Help!- CHNC I PARAMETERS
• Dyna 4M macros and custom G codes
• Newbie- Custom mcodes and macros
• Need Help!- Drilling Macros for CHNC II
• Need Custom macros for Fanuc 3M

[Edwin Murch]

I have that machine running now but the parameters are not written down . If you can't find i well help ! also got parts .
Ed

[shannonrm0]

Thanks Ed. Much appreciate the offer. If no-one else comes through in the next day or two with an existing list, I'll come back to you. If you need, I can let you have my list as a starting point...
Cheers, Richard