Here you are.
Mike
hello to everyone
i just bought a hardinge chnc1 lathe and it is missing a plate that covers 3 micro switches
and 1 of the switches is loose i attached a picture of the missing plate if anyone has a machine
like this and could send me a picture of the plate and how the switch is supposed to be installed
i would greatly appreciate it thanks Jeff
Here you are.
Mike
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
hey thanks !!!!!!