Drip Feed / DNC? --- Conquest T42 with Fanuc 18T controller

[shaggyd]

I have a Hardinge Conquest T42 with Fanuc 18T controller. There is clearly no switch to put it into tape mode. Is there soft key for tape mode?

I have the RS-232 hooked up to a Titan USB, which works great for moving files. I now have some programs that I can't get to run because they are too large.

I thought I had seen "tape" somewhere on one of the control soft keys. I'm certain I have seen "punch" for outputting files. There must be a way to get this thing into tape mode. What's the scoop???

Thanks!

Similar Threads:

• Drip Feed M (T) Plus Controller
• Fanuc Controller in Drip Feed Mode
• Conquest 42 - Drip Feed
• Newbie- Drip Feed to a Kiwa Colt Fanuc O-M controller
• Drip Feed into a Fanuc 11MA Controller on Bridgeport R2G4 V Mill

[machinehop5]

https://www.easydnc.com/cnc-machine-...s/fanuc18.html

Might help...might not is your case,
DJ

[shaggyd]

https://www.easydnc.com/cnc-machine-...s/fanuc18.html

Might help...might not is your case,
DJ

Thanks!!! I've tried all of this. The key is I can't find "Tape Mode" anywhere. Switch nor soft key.